12v 300ah High-Temp Long Life Deep Cycle GEL Battery
Applications
➢ BTS Stations
➢ Solar & Wind energy system
➢ UPS system
➢ Telecom systems
➢ Wheel chair, Golf Car
General Features
✓Able to operate at 40-60°C ✓ DOD 50% 1500 times Cycles
✓ Integrated design to ensure the best Uniformity and reliability
✓ Long life and high stability under high temp. environment (no air-con needed)
✓ Use super-C additives: Deep discharge recovery capability
IEC 60896-21/22
JIS C8704
IEC61427
BS6290 part4
GB/T 19638
CE/ISO
Dimensions & Weight
| Length(mm) | 520±l |
| Width(mm) | 269±1 |
| Height(mm) | 220±l |
| Total Height(mm) | 226±1 |
| Weight(kg) | 77.3±3% |
Technical Specifications
|
Nominal Voltage |
12V (6 cells per unit) | |||
|
Design Floating Life @25 °C |
20 Years | |||
|
Nominal Capacity @25°C(20 hour rate@15.0A, 10.8V) |
300Ah |
|||
|
Capacity @25 °C |
lOhour rate (27.0A,10.8V) 5 hour rate (47.8A, 10.5V) 1 hour rate (173.3A?9.6V) |
270Ah 239Ah 173.3Ah |
||
|
Internal Resistance |
Full Charged Battery@25°C | <1.6mD | ||
|
Ambient Temperature |
Discharge Charge Storage |
■25°C〜60°C.25°C〜60°C ■25°C 〜60°C |
||
|
Max.Discharge Current@25°C |
1800A(5s) |
|||
|
Capacity affected by Temperature (10 hour) |
40°C 25 °C 0°C -15°C |
108% 100% 90% 70% |
||
|
Self-Discharge@25 °C per Month |
3% |
|||
|
Charge (Constant Voltage) @25 °C |
Standby Use |
Initial Charging Current Less than 65.0A Voltage 13.6-13.8V |
||
|
Cycle Use |
Initial Charging Current Less than 65.0A Voltage 14.4-14.9V |
|||
Battery Discharge Table
Discharge Constant Current per Cell (Amperes at 25°C)
|
F.V/Time |
15min | 30min |
45min |
Ih |
2h |
3h |
5h |
8h |
lOh |
20h |
lOOh |
| 1.60V | 468.6 | 278.9 | 198.0 | 173.3 | 105.8 | 74.3 | 50.5 |
33.4 |
29.7 |
16.2 |
3.6 |
| 1.65V | 460.1 | 273.8 | 194.4 | 170J | 103.9 | 72.9 | 49.6 |
32.8 |
29.2 |
15.8 |
3.5 |
| 1.70V | 451.7 | 268.8 | 190.9 | 167.0 | 101.9 | 71.5 | 48.7 |
32.1 |
28.6 |
15.6 |
3.5 |
| 1.75V | 443.1 | 263.7 | 187.2 | 163.9 | 100.1 | 70.2 | 47.8 |
31.5 |
28.0 |
15.2 |
3.4 |
| 1.80V | 426.1 | 253.5 | 180.0 | 157.5 |
96.1 |
67.5 | 45.9 |
30.4 |
27.0 |
15.0 |
3.3 |
Discharge Constant Power per Cell (Watts at 25°C)
| F.V/Time | 15min | 30min |
45min |
Ih |
2h |
3h |
5h |
8h |
lOh |
20h |
lOOh |
| 1.60V | 902.2 | 536.8 | 381.2 | 333.5 |
203.7 |
143.0 |
97.2 |
64.2 |
57.1 |
31.2 |
6.9 |
| 1.65V | 885.8 | 527.1 | 374.2 | 327.5 |
199.9 |
140.3 |
95.4 |
63.0 |
56.1 |
30.6 |
6.8 |
| 1.70V | 869.4 | 517.3 | 367.3 | 321.4 |
196.2 |
137.8 |
93.7 |
61.9 |
55.0 |
30.0 |
6.7 |
| 1.75V | 852.9 | 507.5 | 360.4 | 315.4 |
192.5 |
135.1 |
91.9 |
60.7 |
54.0 |
29.4 |
6.5 |
| 1.80V | 820.1 | 488.0 | 346.5 | 303.3 |
185.1 |
129.9 |
88.4 |
58.4 |
51.9 |
28.9 |
6.4 |
Note: The above data are average values, and can be obtained within 3 charge/discharge cycles. These are not minimum values. Cell and battery designs/specifications are subject to modification without notice. Contact CSBattery for the latest information.
Battery Construction
|
Component |
Positive plate | Negative plate | Containe r &Cover | Safety valve | Terminal |
Separator |
Electrolyte |
Pillar seal |
|
Thick high |
Balanced |
Fire |
Flame Si-Rubber and aging resistance |
Advanced |
Two |
|||
|
Sn low Ca |
Pb-Ca grid |
resistanc |
Female |
PVC /AGM |
layers |
|||
|
Features |
grid with |
for improved |
e ABS |
Copper |
separator for |
Silicon Gel |
epoxy |
|
|
special |
recombinati |
(UL94-V0 |
Insert M8 |
high pressure |
resin seal |
|||
|
paste |
on efficiency |
optional) |
cell design |
Add: Building Evolution, Xingdong industry Park, NO.61, Liuxian 2nd Road, Baoan, Shenzhen, China. Tel: +86-755-29123661 Email: Sales@CSBattery.cn, Support@CSBattery.cn
Website: www.CSBattery.cn
